relation: https://repository.itny.ac.id/id/eprint/5836/
title: Perbandingan alat x-ray dengan olympus element-s untuk menentukan hasil kadar  nikel di PT. Nikelindo Jaya Nusantara Siuna, kabupaten Banggai, provinsi Sulawesi Tengah
creator: ATUNA, BLAIR MARIO
subject: TN Mining engineering. Metallurgy
description: PT. Nikelindo Jaya Nusantara is a contractor company that carries out mining  operations in the IUP area of PT. Prima Dharma Karsa, which is engaged in mining  Laterite Nickel ore located in Siuna Village, Banggai Regency, Central Sulawesi  Province. Nickel laterite is one of the mineral deposits resulting from the chemical  weathering process of ultramafic rocks which results in residual and secondary  enrichment of Ni, Fe elements. In lateritic nickel ore (ore) mining activities,  changes in the elemental content of nickel ore often occur. While still in the mining  front and after being transferred to the barge, it is possible that the changes in  grades that occur experience quite significant differences. The purpose of this study  is to determine the comparison between the two analytical tools to analyze the value  of Nickel content in the Mining Front and on the Barge, then to find out how many  changes in grades occur in lateritic nickel minerals from the mining front after  being transferred to the Barge and find out the factors that cause changes. that rate.  Grade data on nickel laterite minerals from the mining front using the Olympus tool  is 2.11% and x-ray is 2.19% with a dilution of 3.79% and a difference in content of  0.08%. The Fe content from the mining front using Olympus is 31.50% and using  X-Ray is 30.70% so that the dilution content is 2.54%. Furthermore, the minerals  from the Barge using the Olympus tool are 1.99% and Xray are 2.04% with a  dilution content of 2.51%. The Fe content from the Barge using Olympus was  26.85% and using X-Ray was 28.48% so that the dilution content was 6.07%.  Changes in these levels occur due to factors due to accuracy problems in sampling,  sample preparation that ignores procedures, and also human errors such as errors  in sampling code, changing samples when delivered to preparation. So if you refer  to these data, the tool must recalibrate even though the difference in dilution levels  produced is quite low, but it is better if it is recalibrated in a shorter period of time,  so that the difference in dilution levels is not too great, which causes less the  accuracy of the grades displayed from the two tools even though they still meet the  specifications for the grade of nickel minerals according to the company's target = PT. Nikelindo Jaya Nusantara perusahaan kontraktor yang melakukan operasi  penambangan pada daerah IUP PT. Prima Dharma Karsa, yang bergerak dalam  bidang pertambangan bijih Nikel Laterit yang berlokasi di Desa Siuna, Kabupaten  Banggai, Provinsi Sulawesi Tengah. Nikel laterit merupakan salah satu endapan  bahan galian hasil dari proses pelapukan kimia batuan ultramafik yang  mengakibatkan pengkayaan unsur Ni, Fe secara residual dan sekunder. Dalam  kegiatan penambangan bijih (ore) nikel laterit sering terjadi adanya perubahan  kandungan unsur bijih nikel. Ketika masih berada di front penambangan dan setelah  dipindahkan ke Tongkang, bisa saja perubahan kadar yang terjadi mengalami  perbedaan yang cukup siginifikan. Tujuan dari penelitian ini adalah untuk  mengetahui perbandingan antara dua alat analisis untuk menganalisa nilai kadar  Nikel yang berada pada Front Penambangan dan pada Tongkang, selanjutnya  mengetahui berapa perubahan kadar yang terjadi pada bahan galian nikel laterit dari  front penambangan setelah dipindahkan ke Tongkang dan mengetahui faktor  tejadinya perubahan kadar tersebut. Data kadar pada bahan galian nikel laterit dari  dari front penambangan menggunakan alat Olympus sebesar 2,11% dan x-ray  sebesar 2,19% dengan dilusi kadar sebesar 3,79% dan selisih kadarnya sebesar  0,08%. Kadar Fe dari front penambangan menggunakan Olympus sebesar 31,50%  dan menggunakan X-ray sebesar 30,70% sehingga dilusi kadar sebesar 2,54%.  Selanjutnya bahan galian dari Tongkang dengan menggunakan alat olympussebesar  1,99% dan Xray sebesar 2,04% dengan dilusi kadar sebesar 2,51%. Kadar Fe dari  Tongkang menggunakan Olympussebesar 26,85% dan menggunakan X-ray sebesar  28,48% sehingga dilusi kadar sebesar 6,07%. Perubahan kadar ini terjadi karena  faktor karena masalah ketelitian dalam pengambilan sampel, preparasi sampel yang  mengabaikan prosedur, dan juga human error seperti kesalahan dalam pemberian  kode sampling, tertukarnya sampel pada saat diantarkan ke preparasi. Sehingga  jika mengacu pada data tersebut, maka alat harus melakukan kalibrasi ulang  walaupun perbedaan dilusi kadar yang dihasilkan cukup rendah, tetapi lebih baik  jika dilakukan kalibrasi ulang dalam kurun waktu yang lebih cepat, agar perbedaan  dilusi kadar tidak terlalu jauh, yang dimana hal itu menyebabkan kurang akuratnya  kadar yang di tampilkan dari kedua alat tersebut walaupun masih memenuhi  spesifikasi kadar bahan galian nikel sesuai target perusahaan.
date: 2023-07
type: Thesis
type: NonPeerReviewed
format: text
language: id
identifier: https://repository.itny.ac.id/id/eprint/5836/1/Cover%20-%20Daftar%20Lampiran.pdf
format: text
language: id
identifier: https://repository.itny.ac.id/id/eprint/5836/2/Bab%201.pdf
format: text
language: id
identifier: https://repository.itny.ac.id/id/eprint/5836/3/Bab%202.pdf
format: text
language: id
identifier: https://repository.itny.ac.id/id/eprint/5836/4/Bab%203.pdf
format: text
language: id
identifier: https://repository.itny.ac.id/id/eprint/5836/5/Bab%204.pdf
format: text
language: id
identifier: https://repository.itny.ac.id/id/eprint/5836/6/Bab%205.pdf
format: text
language: id
identifier: https://repository.itny.ac.id/id/eprint/5836/7/Bab%206.pdf
format: text
language: id
identifier: https://repository.itny.ac.id/id/eprint/5836/8/Skripsi_Blair%20Mario%20Atuna_710017098.pdf
format: text
language: id
identifier: https://repository.itny.ac.id/id/eprint/5836/9/Daftar%20Pustaka.pdf
format: text
language: id
identifier: https://repository.itny.ac.id/id/eprint/5836/10/Lampiran.pdf
identifier:   ATUNA, BLAIR MARIO  (2023) Perbandingan alat x-ray dengan olympus element-s untuk menentukan hasil kadar nikel di PT. Nikelindo Jaya Nusantara Siuna, kabupaten Banggai, provinsi Sulawesi Tengah.  Other thesis, Institut Teknologi Nasional Yogyakarta.