eprintid: 4202
rev_number: 16
eprint_status: archive
userid: 65
dir: disk0/00/00/42/02
datestamp: 2023-09-08 02:10:00
lastmod: 2023-09-08 02:10:00
status_changed: 2023-09-08 02:10:00
type: other
metadata_visibility: show
creators_name: Muh. Reza Aziz, 710018160
corp_creators: Dr. Supandi, S.T., M.T.
corp_creators: Novandri Kusuma Wardana, S.T., S.Si, M.T.
title: ANALISIS JARAK LEMPARAN FLYROCK UNTUK MENGURANGI RADIUS AMAN ALAT PADA KEGIATAN PELEDAKAN DI PIT KUSAN GIRIMULYA SITE PT. BORNEO INDOBARA OLEH PT. PUTRA PERKASA ABADI, KABUPATEN TANAH BUMBU,
KALIMANTAN SELATAN
ispublished: unpub
subjects: TS
divisions: sch_ecs
keywords: flyrock , Drill & Blast Engineering
abstract: ABSTRACT


The safe radius standard that has been implemented by Drill & Blast Engineering PT. Putra Perkasa Abadi PT. Borneo Indobara refers to KEPMEN ESDM Number 1827 K/30/MEM/2018 which is 300 m for alar and 500 m for humans. However, as mining progressed, the pits began to narrow, coupled with a large number of blasting sites spread across the Kusan Girimulya Selatan pit, the tools began to find it difficult to evacuate to a safe radius. If in the current conditions a reduction in the safe radius of the tool is to be carried out, then an analysis is needed regarding the flyrock of the blasting activity, whether the safe radius can be reduced or still refers to the current regulations.
The research was conducted by measuring the actual maximum throw distance of the flyrock in the field and calculating the theoretical maximum throw of the flyrock. Observations or data collection were carried out 25 times and the maximum throw of the flyrock was 131.06 m. This distance is shorter than 300 m, so a trial or further analysis is needed to reduce the safe radius of the tool to 200 m.
By calculating the maximum flyrock throw distance using the dimensional analysis method by Ebrahim Ghasemi's theory by comparing the estimated flyrock throw based on the blasting geometry and the actual flyrock throw, the percentage error is 24,5% with an average throw distance of 70.55 m. Based on the results of the dimensional analysis, it is estimated that the theoretical longest throwing distance is 156,64 m. This indicates that the blasting geometry applied by PT. Putra Perkasa Abadi PT. Borneo Indobara is good enough, therefore it is concluded that the safe radius of the blasting device at the South Girimulya Kusan Pit can be reduced from 300 m to 200 m.
date: 2023-07-15
publisher: ITNY
official_url: https://repository.itny.ac.id
contact_email: widawati.13.sttnas@gmail.com
full_text_status: restricted
place_of_pub: Yogyakarta
related_url_url: https://library.itny.ac.id
referencetext: DAFTAR PUSTAKA


Abdurrachman, Havis. 2015. Analisis Flyrock Untuk Mengurangi Radius Aman Alat Dari 300 Meter ke 200 Meter Pada Peledakan Overburden Di PIT Bendili, PT. Kaltim Prima Coal, Sangatta, Kalimantan Timur. UPN “Veteran” Yogyakarta, Daerah Istimewa Yogyakarta.
Bhandari, S. 1997. Engineering Rock Blasting Operations, Balkema. Rotterdam. Bieniawski, Z.T., 1989. Engineering Rock Mass Classification: A Complete
Manual for Engineers and Geologist in Mining Civil and Petroleum Engineering. John Wiley and Sons, Canada.
BSW, P. (2006). Matriks Teori dan Aplikasi. Yogyakarta : Graha Ilmu.
Ghasemi, E., Sari,M., & Ataei, M. 2012. Development of An Empirical Model For Predicting The Effects Of Controllable Blasting Parameters On Flyrock Distance In Surface Mines. International Journal of Rock Mechanics and Mining Sciences, Vol.52 : 163-170.
Gokhale, B. (2011). Rotary Drilling And Blasting In Large Surface Mines Press/Balkema.
Irwandy Arief., 2015. Geoteknik Tambang : Mewujudkan Produksi Tambang yang Kontinu Dengan Menjaga Kestabilan Lereng, Penerbit ITB, Bandung.
Keputusan Menteri ESDM Nomor 1827 Tahun 2018 Tentang Pedoman Pelaksanaan Kaidah Teknik Pertambangan Yang Baik.
Konya, CJ. 1995. Blast Design, Precision Blasting Services. Montville.
Nadila, Guspani, P. 2022. Analisis Flyrock Untuk Mengurangi Jarak Aman Minimum Alat Pada Operasi Peledakan Overburden PT. Antareja Mahada Makmur Site PT. Multi Harapan Utama Kalimantan Timur.
Novrianto. 2020. Analisis Pengaruh Geometri Peledakan Terhadap Flyrock Hasil Peledakan di PT. Bintang Sumatra Pacific Kec. Pangkalan Kab. Lima Puluh Kota Provinsi Sumatera Barat. Sekolah Tinggi Teknologi Industri Padang.
Putri, H.A., Yuliadi & Marmer, D. 2017. Analisis Arah dan Jarak Lemparan Flyrock Akibat Kegiatan Peledakan di PT. Dahana Jobsite PT. Adaro Indonesia, Kabupaten Tabalong, Provinsi Kalimantan Selatan. Universitas
 


Islam Bandung.
Retnawati, H. (2017). Pengantar Analisis Regresi dan Korelasi. Pendidikan Matematika. Universitas Negeri Yogyakarta.
Richard, A.B., & Moore, A.J. 2015. Golden Pike Cut-Back Flyrock Control and Calibration of a Predictive Model. Terrock Consulting Engineers : Australia.
Saptono, S. (2012). Pengembangan Metode Analisis Stabilitas Lereng Berdasarkan Karakteristik Batuan di Tambang Terbuka Batubara. Institut Teknologi Bandung.
citation:   Muh. Reza Aziz, 710018160  (2023) ANALISIS JARAK LEMPARAN FLYROCK UNTUK MENGURANGI RADIUS AMAN ALAT PADA KEGIATAN PELEDAKAN DI PIT KUSAN GIRIMULYA SITE PT. BORNEO INDOBARA OLEH PT. PUTRA PERKASA ABADI, KABUPATEN TANAH BUMBU, KALIMANTAN SELATAN.  ITNY, Yogyakarta.    (Unpublished)  
document_url: https://repository.itny.ac.id/id/eprint/4202/1/Draft%20Skripsi_COVER_Muh.%20Reza%20Azis_710018160.pdf
document_url: https://repository.itny.ac.id/id/eprint/4202/2/Draft%20Skripsi_BAB%201_Muh.%20Reza%20Azis_710018160.pdf
document_url: https://repository.itny.ac.id/id/eprint/4202/3/Draft%20Skripsi_BAB%202_Muh.%20Reza%20Azis_710018160.pdf
document_url: https://repository.itny.ac.id/id/eprint/4202/4/Draft%20Skripsi_BAB%203_Muh.%20Reza%20Azis_710018160.pdf
document_url: https://repository.itny.ac.id/id/eprint/4202/5/Draft%20Skripsi_BAB%204_Muh.%20Reza%20Azis_710018160.pdf
document_url: https://repository.itny.ac.id/id/eprint/4202/6/Draft%20Skripsi_BAB%205_Muh.%20Reza%20Azis_710018160.pdf
document_url: https://repository.itny.ac.id/id/eprint/4202/7/Draft%20Skripsi_BAB%206_Muh.%20Reza%20Azis_710018160.pdf
document_url: https://repository.itny.ac.id/id/eprint/4202/8/Draft%20Skripsi_DAFTAR%20PUSTAKA_Muh.%20Reza%20Azis_710018160.pdf