eprintid: 2892
rev_number: 6
eprint_status: archive
userid: 15
dir: disk0/00/00/28/92
datestamp: 2023-12-06 04:32:53
lastmod: 2023-12-06 04:32:53
status_changed: 2023-12-06 04:32:53
type: article
metadata_visibility: show
creators_name: Ratna Kartikasari, .
creators_name: Sutrisna, .
creators_id: kartikafajar@yahoo.com
title: Mechanical Properties and Sensitization Behavior of
as Cast Fe-Al-Mn-xSi-C Lightweight Steel
ispublished: pub
subjects: TJ
keywords: sensitization; as cast Fe-Al-Mn-xSi-C alloys, mechanical
properties, sensitization behavior
abstract: Mechanical properties and sensitization behavior of Fe-Al-Mn-xSi-C alloys
have been investigated by using tensile test, Vickers hardness test, impact test,
scanning electron microscope and XRD. The aim of the research is to
investigate mechanical properties and sensitization behavior of the as cast Fe-
Al-Mn-xSi-Calloys. The alloys were prepared by an induction furnace under
an argon atmosphere. The results showed that the mechanical properties such
as the ultimate tensile test (UTS) and elongation of these alloys were in the
range (617.78-695.56 MPa) and 20.8-30.65% respectively. The hardness of
these alloys was in the range of VHN 220-230. The Charpy impacts of these
alloys were in the range 20-30 J. The microstructures of Fe-Al-Mn-xSi-C
alloys were ɣ phase containing α phase dispersion and were not modified after
sensitization at 1000oC for 60 minutes.
Keywords: sensitization; as cast Fe-Al-Mn-xSi-C alloys, mechanical
properties, sensitization behavior
date: 2012
date_type: published
publisher: Research India Publications
official_url: https://itny.ac.id
contact_email: library@sttnas.ac.id
full_text_status: public
publication: International Journal of advanced Materials Science
volume: 3
number: 4
article_number: 3
pagerange: 325-332
refereed: TRUE
issn: 2231-1211
referencetext: REFERENCES
[1] Frommeyer, 2000, Physical Mechanical PropertiesIron-Aluminum-(Mn-Si)
Lightweight Steels,The 1999 ATS International Steelmaking Conference, Paris.
Sec.4.
[2] Huang, B.X., Wang, X.D., Rong,Y.H., Wang, L., and Jin, L., 2006, Mechanical
Behavior and Martensitic Transformation of an Fe-Al-Si-Al-Nb Alloy,
Materials Science and Engineering A, Vol. 438-440, p. 306-311.
[3] C.G. McKamey, J.H. Devan, P.F. Tortorelli and V.K. Sikka, 1991, A Review
of Recent Development in Fe3Al-based Alloys, Journal of Materials Research.,
6, pp. 1779-1805.
[4] V.K. Sikka, S.Viswanathan and C.G. McKamey, 1993, Development and
Commercialization status of Fe-3Al-based Intermetallic Alloys’, (ed. R.
Darolia et al.), Warrendale, PA, TMS., pp. 483-491.
[5] U. Prakash, R.A. Buckley, H. and C.M. Sellars, 1991, Structure and Properties
of ordered Intermetallics Based on the Fe-Al system, ISIJ International., 31, pp.
1113-1126.
[6] J.S. Dunning, M.L. Glenn, and H.W. Leavenworth, 1984, Subtitutes for
Chromium in Stainless Steel, Metal Progress., vol. 126, No.5, pp. 19-24.
[7] W.C. Cheng, Y.C. Lin, and C.F.Liu, 2003, The Fracture Behaviors in an Fe-Al-
Mn alloy During Quenching Processes, Material Science and Engineering,
A343 (1-2), pp. 28-35.
[8] Kobayashi S, Zaefferer S, Schneider A, Raabe D, and Frommeyer G 2005
Intermetallics 13 1296-1303.
[9] Jablonska M, Rodak K, and Niewielski G 2006 Journal of Achievements in
Materialsand Manufacturing Engineering Vol. 18 Issue 1 107-110.
[10] Baligidad RG, Prakash U, Ramakrishna Rao V, Rao PK, and Ballal NB 1996
ISIJ Vol. 36 No. 12 1453-1458.
[11] Baligidad RG, Prakash U, and Radha Krishna 1998 Metrans A Vol. 249 No. 1-
2 97-102.
[12] Banerji, S.K., 1982, The 1982 Status Report on Fe-Mn-Al Steel, Foote Mineral
Co, Exton.
[13] N.S. Stollof and C.T. Liu, 1994, Environmental Embrittlement of Iron
Aluminides, Intermetallics, 2, pp. 75-87.
332 Ratna Kartikasari and Sutrisna
[14] R.G. Baligidad and K Satya Prasad, 2007, Effect of Al and C on structure and
Mechanical Properties of FMater. Fe-Al-C alloys, Journal of Materials Science
and Technology., 23, 1, pp. 38-44.
[15] Morris, D.G., Munoz Morris, M.A., dan Requejo, L.M., 2007, Working
Hardening in Fe-Al Alloys, Materials Science and Engineering. A, Vol.460-
461, p. 163-173.
citation:   Ratna Kartikasari, . and Sutrisna, .  (2012) Mechanical Properties and Sensitization Behavior of as Cast Fe-Al-Mn-xSi-C Lightweight Steel.  International Journal of advanced Materials Science, 3 (4): 3.  pp. 325-332.  ISSN 2231-1211     
document_url: https://repository.itny.ac.id/id/eprint/2892/1/Mechanical%20Properties%20and%20Sensitization%20Behavior%20of%20as%20Cast%20Fe-Al-Mn-xSi-C%20Lightweight%20Steel.pdf